Response Waveform Graph - Interacoustics Eclipse Instructions For Use Manual

Eclipse Instructions for Use - US Page 65

4.6.7 Response Waveform Graph

The response waveform along with the recording window and response reproducibility range are shown in
the Response Waveform Graph.
The white area of the graph indicates the recording window start and stop time. The area outside the
recording window is greyed out. The recording window start and stop time can be changed prior to starting a
test by dragging the grey area on the graph with the mouse,
The waveform reproducibility window range is indicated by a black line on the x axis. Only the waveform
within this range accounts for the calculation of the waveform reproducibility percentage.
Change the display gain using the up and down arrows above the graph.
By default the average of the A and B buffers are displayed (single waveform). Right click on the graph to
view the individual A & B buffers (two waveforms) or the A – B (Noise) waveform.