What You Will Need; Epx5 Software Installation Prompts - Interacoustics Eclipse Instructions For Use Manual

Eclipse Instructions for Use - US
Supported Operating Systems
• Microsoft Windows® 7 32-bit and 64-bit.
• Microsoft Windows® 8 32-bit and 64-bit.
Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
Important: make sure you have the latest service packs and critical updates installed for the version of
Windows® that you are running.

2.5.3 What you will need:

1. OtoAccess
2. Eclipse module software CD
3. USB Cable
4. Eclipse hardware
Install the OtoAccess™ program from the enclosed CD. The Eclipse module software runs within the
TM
OtoAccess (and/or Noah 4 in the case of the Eclipse ASSR module). Ensure that the database is installed
prior to the Eclipse software installation. Follow the manufacturer's installation instructions provided to install
the relevant database.
Insert the installation CD and follow the on-screen steps to install the Eclipse module software. If the
installation procedure does not start automatically, click "Start", then go to "My Computer" and double click
the DVD/CD-RW drive to view the contents of the installation CD. Double click the "setup.exe" file to initiate
the installation.

2.5.4 EPx5 Software Installation Prompts

During installation of the EPx5 software, the following prompts will appear.
1. Leave all items checked and press continue to install all the factory default protocols, settings and
latency data.
2. Accept installation of latency data.
TM
software CD
Page 13