Configuring Holiday Settings - Honeywell HRHT4041 Remote User Manual

Table 3-22 Date & Time Configurations
Configuration
NTP Server
Port
Upgrade
Period/Interval

Configuring Holiday Settings

1. Click the Holiday Settings tab in the General settings configuration interface to open the
Holiday Settings configuration interface.
Figure 3-50 Holiday Settings Configuration Interface
2. Click Add Holidays, and the Add Holidays window appears.
Figure 3-51 Add Holidays Window
3. Enter a Holiday Name.
4. Select Enable or Disable from the drop-down menu.
5. Click to select a Repeat Mode, either Once or Always.
6. Click to select a Holiday Range, either Date or Week.
7. Enter a Begin Time and End Time.
8. Click Save to save the settings.
Description
Enter the NTP time server address.
Enter the NTP time server port.
Configure the synchronization period between the DVR and
the NTP time server.
Configuration | 87
800-22740 - A - 02-2017