Configuring Rs232 Settings; Configuring Video Matrix (Bnc) Settings - Honeywell HRHT4041 Remote User Manual

90 | Performance Series HQA Digital Video Recorder Remote User Guide

Configuring RS232 Settings

1.
2.

Configuring Video Matrix (BNC) Settings

You can configure the matrix output channel, including the resolution and window split, and its
interval.
www.honeywell.com/security
Table 3-25 Zero Channel Configuration Interface
Settings
Enable
Compression
Resolution
Frame Rate
Bit Rate
 
Click Setup System RS232 to open the RS232 configuration interface.
Figure 3-55 WEB - RS232 Configuration Interface
Table 3-26 RS232 Web Configurations
Setting
Protocol
Baud Rate
Data Bit
Stop Bit
Parity
Make your selections, then click Save.
Description
Click to enable.
The system supports H.264.
Select from the dropdown list: D1, HD1, BCIF, CIF, or QCIF.
Select from the dropdown list. Select from 1 to 25 (PAL) or 1
to 30 (NTSC).
Select from the dropdown list.
Description
Select the corresponding dome Protocol. The default is
Console.
Select the Baud Rate. The default is 115200.
Select from 5 to 8. The default is 8.
Choose either 1 or 2. The default is 1.
Select from None, Odd, Even, Space, or Mark. The default is
None.