Configuring The Camera Name; Configuring The Channel Type - Honeywell HRHT4041 Remote User Manual

40 | Performance Series HQA Digital Video Recorder Remote User Guide
The default save path is C:\PictureDownload for snapshots and C:\RecordDownload for
recorded video.
Click Browse to change the save path, and then click Save.

Configuring the Camera Name

By default, the cameras are named "CAM 1", "CAM 2," "CAM 3," and so on. You can assign each
camera a descriptive name specific to your application (for example, "Front Entrance").
Enter a new camera name, then click Save.

Configuring the Channel Type

By default, the channel type is set to Coax. You can change the channel type to UTP if
unshielded twisted pair (UTP) cabling is used, or to IP if you want to connect to an IP camera.
www.honeywell.com/security
Figure 3-5 Save Path Configuration Interface
Figure 3-6 Camera Name Configuration Interface