Configuring Encoding Settings - Honeywell HRHT4041 Remote User Manual

Configuring Encoding Settings

Click Setup
Table 3-1 Camera Conditions
Setting
Contrast
Hue
Sharpness
Color Mode
Image Enhance
NR (Noise Reduction)
 
CAMERA ENCODE to open the Encoding interface.
Description
Adjusts monitor window contrast. Select from 0 to 100. The
default setting is 50. The recommended range is 40 to 60.
The higher the value, the higher the contrast. Use when the
video brightness is good, but the contrast is not.
Note The video might become hazy if you select a low
contrast value. If the value is too high, the dark
sections might lose brightness and the light parts
might become overexposed.
Adjusts monitor video brightness and darkness. The default
setting is 50. Select from 0 to 100.
The higher the value, the more contrast between the bright
and dark elements of the monitor.
Adjusts the clarity of the image.
The default setting is 1. Select from 0 to 15.
Select from several configured color modes such as
Standard, Soft, Bright, Colorful, Bank, and up to four
Customized settings. Selecting a Color Mode will adjust the
hue, brightness, and contrast of the video.
The default setting is 30. Select from 0 to 100.
The default setting is 50. Select from 0 to 100.
Configuration | 35
800-22740 - A - 02-2017