Configuring Ddns; Honeywell Ddns - Honeywell HRHT4041 Remote User Manual

Configuring DDNS

Use DDNS to connect the various servers so that you can access the system through the server.
1.
2.
3.
4.
5.

Honeywell DDNS

The Honeywell DDNS function works with a special DDNS server and special Professional
Surveillance Software (PSS).
Click DDNS in the Network configuration interface to open the DDNS configuration interface.
Note You need to use the previous IP address in the LAN to log into the device. Go to
the IP address field, which is found in the device's current device information.
You can access the DVR through this new address.
Go to the corresponding service website to apply for a domain name.
Access the system through that domain name.
Note This works even if your IP address has changed.
Select DDNS from the drop-down list.
Table 3-8 DDNS Configuration Options
Configuration
DDNS Type
Host IP
Domain Mode
Domain Name
Email Address
Click Save
Click Test to test the settings.
Description
Select the DDNS protocol from the drop-down list, then
enable the DDNS function.
The DDNS server IP address.
The DDNS server port.
Your self-defined domain name.
Server email address.
Configuration | 49
800-22740 - A - 02-2017