Configuring Face Detection Settings - Honeywell HRHT4041 Remote User Manual

Configuring Face Detection Settings

The DVR can recognize human faces, draw a rectangle around the face, and then trigger
recording, snapshots, and alarms, for example.
To configure face detection settings
Click Face Detect in the Event configuration interface to open the Face Detection configuration
interface.
Figure 3-42 Face Detection Configuration Interface
Table 3-16
Configuration
Enable
Face Detection Configurations
Description
Click to enable alarms. Select a channel from the drop-down
list.
Configuration | 75
800-22740 - A - 02-2017