Configuring Voice Settings
Configuring the Voice Files
In the File List tab, you can add audio files, listen to audio files, rename/delete audio files, and
configure the audio volume.
To configure Voice Files
Click Voice in the System configurations interface to open the Voice configurations interface.
Click Select Audio to import an audio file from a USB device.
Figure 3-60
ATM/POS Configuration Interface - Without Protocol
Figure 3-61
Voice Configuration Interface
Note
The audio file can either be saved to the HDD drive, or remain on the USB device.
However, the USB will have to remain connected to the DVR. If the audio file is
saved to the HDD, then it is not necessary to have the USB device connected at
all times.
Configuration | 95
800-22740 - A - 02-2017