Configuring Upnp; Preparing For Upnp; Configuring Snmp - Honeywell HRHT4041 Remote User Manual

56 | Performance Series HQA Digital Video Recorder Remote User Guide

Configuring UPnP

UPnP allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify, or remove a UPnP item.

Preparing for UPnP

1.
2.
3.
4.
5.
Configuring UPnP
Setting
PAT
UPNP VAV Report
LAN IP
WAN IP

Configuring SNMP

SNMP allows the communication between the network management work station software and
the proxy of the managed device. It is reserved for a third party developer.
www.honeywell.com/security
In the Windows OS, click Start
Click Add/Remove Windows Components, and then select Network Services from the
Windows Component Wizard.
Click Details, then check Internet Gateway Device Discovery and Control client and
UPnP User Interface. Then click OK to begin the installation.
Enable UPnP from the internet. If your UPnP is enabled in the Windows OS, then the DVR
can automatically detect it through the My Network Places.
Click UPnP in the Network configuration interface to open the UPnP configuration
interface.
Figure 3-22 UPnP Configuration Interface
Table 3-12 UPnP Configurations
Description
Click to enable/disable UPnP.
Enable/disable UPnP to work with iView Now.
Enter the DVR's IP address from the TCP/IP page.
Enter the router IP address.
 
Control Panel Add or remove programs.