Honeywell HRHT4041 Remote User Manual page 81

1. Click Schedule in the Storage selection tree to open the Schedule configuration
interface.
Figure 3-44 Schedule Configuration Interface
The schedules are color-coded by type:
• Green: General recording/snapshot.
• Yellow: Motion detection recording/snapshot.
• Red: Alarm recording/snapshot.
• Blue: MD&Alarm recording/snapshot.
• Orange: Intel recording/snapshot.
Table 3-18 Scheduled Storage Settings
Setting
Channel
Pre-record
Redundancy
Description
Select a channel from the drop-down list
Enter a pre-recording time here. Select from 0 to 30.
You can configure the NVR to backup recorded files onto two
different HDDs. Click to enable.
Note Before you can enable this function, you must
configure at least one HDD as redundant. Go to

Storage HDD Manage.
This function is not available if there is only one HDD.
Configuration | 81
800-22740 - A - 02-2017