Honeywell HRHT4041 Remote User Manual page 57

Click SNMP in the Network configuration interface to open the SNMP configuration interface.
Figure 3-23 SNMP Configuration Interface
Table 3-13 SNMP Configurations
Configuration
SNMP Port
Read Community
Write Community
Trap Address
Trap Port
SNMP Version
Description
The listening port of the proxy program of the DVR. It is a UDP
port, not a TCP port. This value ranges from 1 to 65535. The
default is 161.
This is a string, and it is a command between the managing
processes and the proxy process. Read Community defines
the authentication, the access control, and the management
relationship between one proxy and one managers' group.
Ensure that the device and the proxy are the same. The Read
Community reads all the objects the SNMP supports in the
specified name. The default is Public.
This is a string, and it is a command between the managing
processes and the proxy process. It defines the
authentication, the access control, and the management
relationship between one proxy and one manager's group.
Ensure that the device and the proxy are the same. The Write
Community reads, writes, and/or accesses all of the objects
the SNMP supports in the specified name. The default is
Write.
The Trap information destination address from the device's
proxy program.
The Trap information destination port from the device's proxy
program. The Trap port allows the gateway device and the
client-end PC in the LAN to exchange information.
If you check V1, then the system processes only the V1
information.
If you check V2, then the system processes only the V2
information.
Configuration | 57
800-22740 - A - 02-2017