Registering/Finding An Ip Camera - Honeywell HRHT4041 Remote User Manual

42 | Performance Series HQA Digital Video Recorder Remote User Guide
5.

Registering/Finding an IP Camera

To register an IP camera
1.
2.
TIP!
www.honeywell.com/security
Go to Registering/Finding an IP Camera on page 42
you designated as IP.
Note You must first designate channels as IP (rather than BNC or UTP), apply that IP
designation, and reboot the DVR before you can see the REGISTRATION tab.
See Designating a Channel as IP on page
 
Click Setup CAMERA
Figure 3-8 Registration Configuration Interface
Either click Device Search to automatically find IP cameras.
Select IPC in the Display Filter to see only IP cameras.
a. Click to select a found IP camera.
b. Click Add to add the found IP camera to the Added Device list.
Note If the DVR fails to display the model name of a found IP camera, click Device
Search to rediscover the online IP cameras. The model name should appear in
the Device list.
OR
Click Manual Add to manually add an IP camera.
to add the IP camera to the channel
41.
REGISTRATION to open the Registration interface.