Configuring Local Storage - Honeywell HRHT4041 Remote User Manual

3.
4.

Configuring Local Storage

Click HDD MANAGE in the Storage selection tree to open the Local Storage configuration
interface.
The Local Storage interface shows HDD information. You can also configure read-only,
read-write, redundancy (if there is more than one HDD), and format settings.
Configure the schedule, then click Save.
Table 3-19 Schedule Configurations
Configuration
Channel
Regular
Motion
Alarm
MD&Alarm
Intel
Click Save to save the settings, and then click Save to save the Schedule configuration.
Figure 3-46 Local Storage Interface
Description
Select a channel from the drop-down list.
Check to enable the Regular schedule mode.
Check to enable the Motion Detection schedule mode.
Check to enable the Alarm mode.
Check to enable the MD&Alarm mode.
Check to enable Face Detection mode.
Configuration | 83
800-22740 - A - 02-2017