Option Board R2: Australian Spread Spectrum Radio - semaphore KINGFISHER PLUS+ Hardware Reference Manual

Option Board R2: Australian Spread Spectrum
Radio
When installed in a Communications or processor, the corresponding port CD
(Carrier Detect) LED will be lit when the board is functioning correctly.
During testing units should have a minimum separation of 60 cm, and an antenna should
always be fitted to avoid damage.
Avertissement: l'Exposition aux RF
Hardware Manual Version 7.16
The R2 Spread Spectrum radio option board uses the Digi
900 MHz RF module to provide a high speed data link in
Australia. This radio uses the public frequency band and
does not need to be licensed.
Warning: RF Exposure
900 MHz Spread Spectrum Radio
This equipment is approved only for mobile and base station
transmitting devices. Antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 30 cm from all
persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Radio 900 MHz à spectre étalé (Spread Spectrum)
Cet équipement est approuvé uniquement pour les appareils
mobiles de transmission et pour la station de base. La ou les
antennes utilisées pour cet émetteur doivent être installées pour
garantir une distance d'au moins 30 cm de toutes personnes et ne
doivent pas être proche ou en opération en conjonction avec
n'importe quel autre antenne ou émetteur.
http://www.servelec-semaphore.com/
Kingfisher Plus+ Hardware Manual
Page 118