Safety and responsibility
NOTICE!
Correct and proper use
Damage to the product or its sur‐
roundings
–
The unit is not intended to
measure or regulate gaseous or
solid media
–
The unit may only be used in
accordance with the technical
details and specifications pro‐
vided in these operating instruc‐
tions and in the operating instruc‐
tions for the individual
components
NOTICE!
Correct sensor operation / Run-in
time
Damage to the product or its sur‐
roundings
–
Correct measuring and dosing is
only possible if the sensor is
working perfectly
–
It is imperative that the run-in
times of the sensors are adhered
to
–
The run-in times should be
allowed for when planning initial
operation
–
It may take a whole working day
to run-in the sensor
–
Please read the operating instruc‐
tions for the sensor
10
NOTICE!
Correct sensor operation
Damage to the product or its sur‐
roundings
–
Correct measuring and dosing is
only possible if the sensor is
working perfectly
–
Check and calibrate the sensor
regularly
NOTICE!
Compensation of control deviations
Damage to the product or its sur‐
roundings
–
This controller cannot be used in
control circuits which require
rapid compensation (< 30 s)
2.2
Correct and proper use
NOTICE!
Compensation for control deviations
Damage to the product or its sur‐
roundings
–
The controller can be used in pro‐
cesses, which require compensa‐
tion of > 30 seconds