Dhcp Server Configuration - Draytek Vigor2500V Manual

routers connected to LAN interface.
2nd Subnet: Set the 2nd subnet to exchange RIP packets with neighbor
routers connected to LAN interface.

DHCP Server Configuration

4.2
DHCP stands for Dynamic Host Configuration Protocol. It can automatically
dispatch related IP settings to any local user configured as a DHCP client.
Please refer to the following picture for DHCP Server Configuration.
Enable Server: Assign IP address to LAN PC automatically.
Disable Server: Assign IP address to LAN PC manually.
Relay Agent: Allows PCs on LAN to request IP address from other DHCP
server.
Start IP Address: Set the start IP address of the IP address pool.
IP Pool Counts: Set the number of IP address pool.
Gateway IP Address: Sets the gateway IP address for the DHCP server.
Usually, it should be same as 1st IP address when the router works as a
default gateway.
LAN TCP/IP and DHCP
4-4