Installing
Two installation variants
There are two installation variants:
● With mounting rail
● Without mounting rail
For corresponding conditions, refer to the next chapters.
2.1
Installation without mounting rail
Simple installation
The ET 200eco PN distributed I/O device is designed for easy installation.
● The I/O device must be mounted on a solid base
● and can be prewired.
Requirements
Screw type
Cylinder head screw M5 according to ISO 1207/ISO 1580
(DIN 84/DIN85)
Hexagon socket head cap screw M5 according to DIN EN
ISO 4762
Tools required
Medium-sized screwdriver or 4 mm hex socket driver.
ET 200eco PN
Operating Instructions, 06/2009, A5E01250250-04
Description
Minimum screw length: 30 mm.
Any washers you might need should conform to DIN 125.
2
19