Wiring The Et 200Eco Pn; Wiring The Et 200Eco Pn To Functional Earth (Fe) - Siemens SIMATIC ET 200eco PN Operating Instructions Manual

3.5

Wiring the ET 200eco PN

3.5.1

Wiring the ET 200eco PN to functional earth (FE)

Properties
● You must connect the ET 200eco PN with the functional earth. The I/O module is
● This connection to functional earth is also required to discharge any interference currents
Requirements
Always provide a low-impedance connection to functional earth.
Tools required
● Stripping tool
● Crimp tool
● Screwdriver
Required accessories
● M5 x 8 fixing screw and washers
● Grounding cable (copper braid) with a minimum cross-section of 4 mm
● Cable lugs
ET 200eco PN
Operating Instructions, 06/2009, A5E01250250-04
equipped accordingly with a ground terminal.
to ground, and for EMC strength.
3.5 Wiring the ET 200eco PN
2
Wiring
33