Pin Assignment Of Digital Outputs - Siemens SIMATIC ET 200eco PN Operating Instructions Manual

Wiring
3.6 Pin assignment of connectors
3.6.4

Pin assignment of digital outputs

I/O device 8 DO DC 24V/1,3A 4×M12 (6ES7142-6BF00-0AB0)
You will find the pin assignment for the 8 DO DC 24V/1,3A 4×M12 I/O device in the table
below.
Table 3- 7 Pin assignment of the M12 cable connector for the 8 DO DC 24V/1,3A 4×M12 I/O device
Pin Assignment X1/X2
(1L+ "non switched")
1 Not assigned
2 Connector X1: Output
signal 4
Connector X2: Output
signal 5
3 Supply ground
(1M for X1/X2)
4 Connector X1: Output
signal 0
Connector X2: Output
signal 1
5 FE
For the Y cable, pin 2 and pin 4 are assigned to pin 4 (B) and pin 4 (A).
42
Assignment X3/X4
(2L+ "switched")
Connector X3: Output
signal 6
Connector X4: Output
signal 7
Supply ground
(2M for X3/X4)
Connector X3: Output
signal 2
Connector X4: Output
signal 3
View of the cable connector (wiring side)
Operating Instructions, 06/2009, A5E01250250-04
ET 200eco PN