JRC JCY-1800 Installation Manual page 76

4. Cabling
JCY-1800/1850 VDR/S-VDR Installation Guide
4.2.6.2. Monitor Timing of the RADAR Video
The monitor timing of the RADAR video signal is decided based on the VESA DTMS. The VESA
DTMS stands for Video Electronics Standards Association Discrete Monitor Timings Standard.
With the VDR, the following signals can be input.
1) Resolution:
2) Refresh rate:
3) Pixel frequency:
4) Scan method:
5) Synchronize method:
Resolution
640 x 350 pixels
640 x 400 pixels
720 x 400 pixels
640 x 480 pixels
800 x 600 pixels
1024 x 768 pixels
1152 x 864 pixels
1280 x 960 pixels
1280 x 1024 pixels
1600 x 1200 pixels
DOC No. 7ZPJD0387C
Up to 16000 x 1200 pixels
Up to 85 Hz (depending on resolution)
Up to 162.0 MHz
interlaced / non-interlaced
Separate / Synch on Green
Refresh
Rate
85 Hz
85 Hz
85 Hz
60 Hz
72 Hz
75 Hz
85 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
70 Hz
75 Hz
85 Hz
75 Hz
60 Hz
60 Hz
75 Hz
85 Hz
60 Hz
* Scan method is non-interlaced for all the resolutions.
Horizontal
Frequency Frequency
37.9 kHz 31.500 MHz
37.9 kHz 31.500 MHz
37.9 kHz 35.500 MHz
31.5 kHz 25.175 MHz
37.9 kHz 31.500 MHz
37.5 kHz 31.500 MHz
43.3 kHz 36.000 MHz
31.5 kHz 36.000 MHz
37.9 kHz 40.000 MHz
48.1 kHz 50.000 MHz
46.9 kHz 49.500 MHz
53.7 kHz 56.250 MHz
48.4 kHz 65.000 MHz
56.5 kHz 75.000 MHz
60.0 kHz 78.750 MHz
68.7 kHz 94.500 MHz
67.5 kHz 108.000 MHz
60.0 kHz 108.000 MHz
64.0 kHz 108.000 MHz
80.0 kHz 135.000 MHz
91.1 kHz 157.500 MHz
75.0 kHz 162.000 MHz
66
Pixel