JRC JCY-1800 Installation Manual page 68

3. Mechanical Installation
JCY-1800/1850 VDR/S-VDR Installation Guide
3) Wiring in the Radar
DOC No. 7ZPJD0387C
Fix the display cable by the attached clamp.
Earth the shield of LAN cable and Power
cable to bottom chassis of the Radar.
Fix the two cables on the comb type base.
Fix the two cables at optimal position by
attached clamps.
Pull out the three cables from a feed port.
Fix the three cables by an attached clamp.
Cables: Display cable
Pull up the three cables through this space.
58
LAN cable
Power cable