JRC JCY-1800 Installation Manual page 32

1. Specifications
JCY-1800/1850 VDR/S-VDR Installation Guide
1.10.7. Digital Signal Converter (NCT-72) 64CH
(1) Function:
(2) Performance:
a) Dry contact Input port:
b) Contact closure interface:
1) Driving power supply:
2) Status:
c) Communication port
d) Data output interface
(3) Optional Analog interface:
a) Analog signal Input port:
b) Signal input:
1) Voltage:
2) Current:
c) Communication port
d) Data output interface
(4) Environmental condition:
a) Operating temperature:
b) Temperature and humidity:
c) Vibration:
(5) General specification
a) Power voltage:
b) Power consumption:
c) Size:
d) Mass:
e) Color:
1.10.8. Digital Signal Converter (NCT-63) 16CH
(1) Function:
(2) Performance:
a) Dry contact Input port:
b) Contact closure interface:
1) Driving power supply:
2) Status:
c) Communication port
d) Data output interface
(3) Optional Analog interface:
a) Analog signal Input port:
b) Signal input:
1) Voltage:
DOC No. 7ZPJD0387C
-Option-
The Digital signal converter should acquire alarms or status condition via dry
contact closure.
Dry (voltage free) contact closure
Max. 64 port
+12VDC
Normal Close / Normal open
To the NDV-1800 RCU
Data type: IEC61162-1
(When the optional Analog signal converting board CEF-60 is added.)
Max. 8 port
+/-500mV, +/-5V, +/-10V
+/-20mA
Same port as dry contact signals
Data type: IEC61162-1
Analog Sentence formatter: XDR
-15°C to +55°C (IEC 60945 protected type)
+40°C, 93%
2Hz to 13.2Hz ±1.0mm
13.2Hz to 100Hz 0.7G
100 - 120VAC +/- 10% 1-phase 50/60Hz (IEC 60945)
200 - 240VAC +/- 10% 1-phase 50/60Hz (IEC 60945)
25VA
300(w) x 130(d) x 420(h) mm
5kg
N7 semi-gloss
-Option-
The Digital signal converter should acquire alarms or status condition via dry
contact closure.
Dry (voltage free) contact closure
Max. 16 port
+12VDC
Normal Close / Normal open
To the NDV-1800 RCU
Data type: IEC61162-1
(When the optional Analog signal converting board CEF-60 is added.)
Max. 8 port
+/-500mV +/-5V +/-10V
22