JRC JCY-1800 Installation Manual page 67

3.9.3. Connection to the JMA-900 Chart Radar Unit
3.9.3.1. Fastening the Radar Interface Unit on the JMA-900 Chart Radar Unit
Install the Radar Interface unit (NWP-46) as follows procedure.
1）Remove the front cover of Radar
2）Connect the display cable to Radar
JCY-1800/1850 VDR/S-VDR Installation Guide
Remove the cover of Radar with reference to a
"Radar installation guide".
Assemble the laid LAN cable and Power cable.
Connect the DVI plug of an attached display cable
to the jack on the AGP slot of the Radar.
Caution
Do not remove this connector when the Chart
Radar is turned on. An image data is no longer
outputted from Radar.
57
3. Mechanical Installation
DOC No. 7ZPJD0387C