Operating Instructions UPster U 400 / U 500 / U 500S
9735077
12.2 Noise emission
Work place noise level L
pA
12.3 Electrical and hydraulic equipment data
See attached technical sheet
12.4
Dimensions, technical data, installation instructions
See attached technical sheet
13
Non-ionising radiation
Non-ionising radiation is not produced intentionally but unfortunately comes about due to
electrical operating equipment (e.g. electrical motors, high-voltage cables and magnetic
coils).
In addition the machine has no strong permanent magnet. There is a high possibility of
eliminating any influence on active implants (e.g. pacers, defibrillators) by maintaining a
safety distance of 30 cm (distance of the field source to the implant).
Design and construction subject to change without prior notice
Page
£ 70 dB
23
44
of