Meiko UPster U 400 Operating Instructions Manual page 30

Operating Instructions UPster U 400 / U 500 / U 500S
17.3.7 Viewing/modifying parameters: (depending on the code en-
17.3.8 Viewing input status:
9735077
tered)
Display
Press the "Accept" button to confirm.
Now, the first parameter is displayed with a value.
Press the "I" key to move forwards or press the "II" key to move backwards, until
the parameter you require is displayed.
Confirm the parameter to be modified by pressing the "accept" key, the value will flash.
Increase the value using the "I" key or reduce it using the "II" key and confirm with the
"Accept" key.
You can leave this level by pressing the "0" key.
See 17.4 for list of parameters.
Display
Press the "Accept" button to confirm.
Now, the first digital input will be shown, with status.
Use the "I" to go forward and the "II" to go backward until the desired input is displayed
Display: input set
Display: input not set
You can leave this level by pressing the "0" key.
The direct value (here the boiler temperature) is displayed for the analogue inputs. Use
the "I" to go forward and the "II" to go backward until the desired input is displayed
Assignment details for the inputs are given on the assignment list for each machine. (see
17.5).
Design and construction subject to change without prior notice
Page
.
.
30 44
of