Service Level - Meiko UPster U 400 Operating Instructions Manual

Operating Instructions UPster U 400 / U 500 / U 500S
Press the "I" key to increase the value/code indicated on the display unit, or press the "II"
key to decrease it, or press the "accept" key to save it. The next value will then flash and
will be the only one visible.
If your entry is incorrect code input is cancelled, and an information code of 122 is dis-
played.
If you enter all the digits correctly you will arrive at the chosen level, either service, config-
uration or machine data.

17.3 Service level

The list of service parameters can be found on this level (parameter numbers 1xx). You
can view or modify the parameters here, or you can access the rinse aid and cleaner
hose ventilation feature.
On the service level, you will first see the display below:
This corresponds to the viewing/modifying parameters (see 17.3.1)
This is equivalent to Ventilate rinse aid inlet (see 17.3.2)
This is equivalent to Ventilate detergent supply (see 17.3.3)
This corresponds re-setting partial demineralisation display (see 17.3.4)
This corresponds first-time-filling of boiler (see 17.3.5)
Press the "I" key to move forwards or the "II" key to move backwards or the "accept" key
to make a selection. You are now at the current level.
You can leave this level by pressing the "0" key.
9735077 Design and construction subject to change without prior notice
27 44
Page of