Meiko UPster U 400 Operating Instructions Manual page 31

Operating Instructions UPster U 400 / U 500 / U 500S
17.3.9 Viewing/modifying output status (depending on code input)
Display
Press the "Accept" button to confirm.
Viewing:
Now, the first output is shown with its status.
Press the "I" key to move forwards and the "II" key to move backwards, until you reach
the output you require.
Modifying:
Press the "Accept" key to confirm the modification of the output; the value flashes. Press
the "I" key to modify the value and press the "accept" key to save it.
The output is now set.
You can leave this level by pressing the "0" key.
Assignment details for the outputs are given on the assignment list for each machine.
(see 17.5)
17.3.10 Viewing/modifying the dosing technology level
By entering code 40000 (read only) or 40044 (read / enter), the user can access the 4th
parameter level summarizing all the dosing technology parameters:
P104, P105, P218, P219, P224, P225, P321, P322, P326, P327.
See 17.4 for list of parameters
9735077 Design and construction subject to change without prior notice
31 44
Page of