Table of Contents
Advertisement
Lattice Semiconductor
Figure 13. Device Information Dialog
Figure 14. SPI Serial Flash Device Dialog
8. Select Browse and point to the location of the bitstream file. Note that if you have a ".JED" file output from isp-
LEVER, you can convert it to a ".BIT" file using ispVM and selecting the UFW (Universal File Writer) icon with
the input file being the ".JED" file from ispLEVER and the output file being a ".BIT" file.
9. Select Flash Device and in the Select Device window, change the selections as shown in Figure 15. Press
OK to close the Select Device window.
Evaluation Board User's Guide
30
LatticeXP2 Advanced
Advertisement
Table of Contents
