Rs232 Modifiers; Rs232 Baud Rate - Honeywell Voyager 1450g Series User Manual

Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style terminal and the system is dropping
characters. Default = Off.
Automatic Direct Connect Mode
On

RS232 Modifiers

RS232 Baud Rate

Baud Rate sends the data from the scanner to the terminal at the specified rate. The host terminal must be set for the
same baud rate as the scanner. Default = 9600.
300
1200
4800
19200
* Automatic Direct Connect
Mode Off
600
2400
* 9600
2 - 19