Control Character Output; Keyboard Modifiers - Honeywell Vuquest 3320g User Manual

Control Character Output

This selection sends a text string instead of a control character. For example, when
the control character for a carriage return is expected, the output would display
[CR] instead of the ASCII code of 0D. Refer to
1252)
the chart).
Note: Control + X (Control + ASCII) Mode overrides this mode.
Default = Off.
Control Character Output On

Keyboard Modifiers

This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Control + X (Control + ASCII) Mode On
The scanner sends key combinations for ASCII control characters for values 00-1F.
Windows is the preferred mode. All keyboard country codes are supported. DOS
mode is a legacy mode, and it does not support all keyboard country codes. New
users should use the Windows mode. Refer to
1252)
Windows Mode Prefix/Suffix Off: The scanner sends key combinations for ASCII
control characters for values 00-1F, but it does not translate any prefix or suffix
information.
Default = Control + X Mode Off.
Windows Mode Control + X
Mode On
Vuquest 3320g User Guide
on page 214. Only codes 00 through 1F are converted (the first column of
on page 214 for CTRL+ X Values.
ASCII Conversion Chart (Code Page
* Control Character Output Off
ASCII Conversion Chart (Code Page
* Control + X Mode Off
23