Siemens SINUMERIK 840D Operator's Manual page 7

0
03.04
Warnings
 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Other information
For safety reasons some functions are locked against unauthorized
access. The machine manufacturer can influence or change the
described functional behavior. Always refer to the information and
specifications provided by the machine manufacturer.
The following notes used in the documentation are of special
significance:
Notes
This symbol is always displayed in this document to draw your
attention to an important item of information in a more complex
description.
In this documentation you will find the symbol shown on the left with a
reference to an ordering data option. The function described will
only be executable if the control contains the designated option.
The following warning notices with varying degrees of significance
are used in the document:
Danger
This symbol indicates that death, severe personal injury or substantial
property damage will result if proper precautions are not taken.
Warning
This symbol indicates that death, severe personal injury or substantial
property damage may result if proper precautions are not taken.
Caution
This warning (with the triangular symbol) means that minor physical
injury can occur if the appropriate precautions are not taken.
Caution
This symbol (without a warning triangle) indicates that damage to
property may result if proper precautions are not taken.
0
Preface
Intended use
vii