Create New File - Siemens SINUMERIK 840D Operator's Manual

4
03.04
Creating a workpiece

4.1.3 Create new file

 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Other information
If there is no "_TEMPL_" for a workpiece then a workpiece needs to
template
be created with the name "_TEMPL_ ".
If a workpiece is already present with the name "_TEMPL_" then this
workpiece is copied and renamed when the "New" function is used.
All of the files in this directory are also copied into the new directory in
the process.
Example Workpiece: _TEMPL_
Press the softkey New
Name: Specify "ACHSE" (Axis)
A new workpiece called "Achse" (Axis) is then created with the
following files:
Function
To create a new file under a workpiece directory, a working window is
opened which asks you to input the file name. In this new, empty file
you can edit the programs which are required for machining of the
workpiece.
Prerequisites
A workpiece has been selected with the cursor keys in the working
window Workpiece Overview and the Input key has been pressed to
move to the directory of the selected workpiece.
Call up the working window Create New File by clicking on the New
softkey (initially without a file name ).
Program operating area
4.1 Directories
TEMPL.MPF
DATEN.INI
TEST.MPF
ACHSE.MPF
DATEN.INI
TEST.MPF
4
4-49