Service Displays; Service Axes - Siemens SINUMERIK 840D Operator's Manual

9
Messages, Service Displays, PLC Data – Operating Area Diagnosis

9.4 Service displays

9.4.1 Service axes

9-106
Precondition
• The Serv. axis softkey has been pressed in the Service Displays
working window.
Service Axes working window
Operating sequence
• Use the cursor keys to select the desired line.
Further buttons
Axis -/+ Displays information about the previous/next axis
→ Returns to the Service Displays working window.
Recall
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
9
03.04
 Siemens AG, 2004. All rights reserved.