8.2.5 Fault log
8.2.6 Read in data from NC card
Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Press the corresponding softkey to start the desired action:
Moves the file from the transfer directory to the
directory selected in the Read in File working window.
Gener.archive → new working window in which a prompt asks for the
archive name. Afterwards the current file is copied to
the transfer directory.
Deletes the file from the clipboard.
Updates the contents of the transfer directories
A safety prompt appears before the file is deleted or organized into a
In the event of a fault during the data transfer, a log is created and
shown in the RS-232-C Fault Log working window under "User Abort".
Press the Recall softkey to return to the calling working window.
Files can also be read in from an NC card.
• The NC Card softkey has been pressed in the Read in data
Data Transmission – Operating Area Services
8.2 Read in data