Correction Mode - Siemens SINUMERIK 840D Operator's Manual

7
03.04
7.6

Correction mode

7.7 Example: Creating a new program with teaching
 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Function
You can make alphanumerical corrections or teach-in, unless the
same program is being processed on a different channel.
A warm restart is only possible when the editor has been closed with
the Close softkey (see below).
Operating sequence
Similar to Editor in Normal Mode
• Edit the block alphanumerically (with the cursor key block),
• Press Input to confirm the entry; → new line.
Further buttons
Edit Text Edit working window
Search Searches for a sequence of characters (string)
Continue Searches for the last string again
search
Close Closes the editor; returns to the starting window
Cursor Standard editor functions (entries are accepted-
keys whenever the line is changed).
Programming example
Option A
1. Create a new program with the following contents:
N10 F5000 ; Speed at G01
N20 M0 ; Programmed stop
N30 M30 ; End of program
2. Select the program
3. Switch on the single block: SBL1
4. Press "NC-Start" twice: Program execution is at "MO".
5. Teach the block: The block is inserted after "M0".
6. Teach the next block and the other blocks. The block is inserted
after the last taught block.
Teach-In

7.6 Correction mode

7
7-89