Channel-Specific Setting Data - Siemens SINUMERIK 840D Operator's Manual

3
Parameters operating area
3.4 Setting data

3.4.2 Channel-specific setting data

3-36
Depending on the cursor position, the corresponding name is
displayed parallel to the setting data or machine data in the dialog
line.
Operating sequence
• Select the setting data with the cursor.
• Use the numerical input to modify the data.
• Press Input to accept the value (or exit the field to do this).
Further buttons
Search An additional window opens in the lower third of the
working window. In this window you can enter the
name or partial name (search string) or the number to
look for.
Continue
search Searches again for the same search string
Recall Returns to the Setting Data working window
Prerequisites
• The softkey Channel SD has been pressed in the Setting Data
working window.
The Channel-specific Setting Data working window opens.
All of the channel-specific setting data are listed.
Operating sequence
• Select the setting data with the cursor. (The machine data name
is displayed in the dialog line).
• Use the numerical input to modify the data.
• Press Input to accept the value (or exit the field to do this).
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
3
03.04
 Siemens AG, 2004. All rights reserved.