Download  Print this page

Machine Operating Area - Siemens SINUMERIK 840D Operator's Manual

Handheld terminal.
Hide thumbs

Advertisement

5
Manual Mode – Operating Area Machine
5.3 Reference point approach
References
5-64
Operating sequence
Use the Jog key to traverse the desired axis by pressing the + or -
side.
However, the axis will only react if the chosen direction matches the
configuration. If it does then the axis is traversed to the reference
point and the actual value display is updated.
Several axes can be traversed at the same time here as well.
Softkeys
User
Calls up the User Agreement working window (only
Agreem.
if the Safety Integrated option is selected):
The display shows the machine axes in the MCS, the current position
and a check box for "Activate/deactivate approval".
Operating sequence
• Position the cursor on the desired machine axis.
• Use the Select button to activate/deactivate approval for the
selected machine axis.
Check whether a reference point approach has been performed on
the relevant axis. If not, the error message "Perform reference point
approach first" is displayed. Approval cannot be granted for the axis
until the reference point approach has been performed on the axis.
The User Approval function is only offered if user approval is required
on at least one axis of the channel.
For more information, please refer to the following documents:
/BA/ SINUMERIK Operating Instructions, Machine Operating Area
and
/FBSI/ SINUMERIK Description of Functions, Safety Integrated.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
5
03.04
 Siemens AG, 2004. All rights reserved.

Advertisement

This manual also for:

Sinumerik 840diSinumerik 810dHt6

Comments to this Manuals

Symbols: 0
Latest comments: