5
Manual Mode – Operating Area Machine
5.2 Jog operating mode
5-62
Operating sequence
After pressing the Control Panel Function key, press the softkey
Traverse to select the axis system.
Machine manufacturer
The machine manufacturer configures which axes are assigned to the
axis system.
Please refer to the machine manufacturer's specifications.
• Use the Jog key to traverse the desired axis by pressing
the + or - side.
The axis is traversed, and the corresponding value is updated on the
display.
The traversing process stops when the key is released or when a
preselected stop is reached.
In contrast to MCP, it is possible for several axes to be traversed
simultaneously.
You can influence the traversing speed with the Override rotary
button.
Softkeys
Act.Val. MCS → MCS Actual Values working window
→ Increment Selection working window
INC
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
5
03.04
Siemens AG, 2004. All rights reserved.