Operating Areas; User Interface - Siemens SINUMERIK 840D Operator's Manual

1
03.04
1.2

Operating areas

 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
In the control system, the basic functions are grouped into the
following operating areas (light areas in the diagram):
Creating,
Working
through
parts programs,
Monitoring,
sequence
charts,
actual values,
channel
Machine
switchover,
Program control,
Teaching parts
programs
Alarm displays,
messages,
service displays,
PLC status
Operating areas chart
All functions can be accessed by the user via the user interface of the
HT 6.
The user interface comprises:
• on the front
− a display unit with 16 - 20 lines, each with 38 - 52 characters
(depending on the settings selected by the machine
manufacturer),
− various blocks of input keys,
− an override rotary button and
− an EMERGENCY OFF button,
• on the rear
− two agreement buttons

1.2 Operating areas

managing V.24 services,
parts programs NC card
Program Services
Operating
Parameters
areas
Diagnostics
Commissioning
Machine data,
language,
keyword,
PLC status
1
Introduction
Tool offsets,
R parameters,
Setting data,
Zero
offset,
Monitoring and
changing global
user data
1-17