Download  Print this page

Cycles - Siemens SINUMERIK 840D Operator's Manual

Handheld terminal.
Hide thumbs

Advertisement

4
Program operating area
4.1 Directories

4.1.5 Cycles

4-52
Function
Cycles are subroutines which are used to perform repetetive
machining processes on the workpiece.
Precondition
In the Standard Directories Overview working window one of the
following softkeys has been selected:
CST
for the standard cycles or, analogously,
CUS
for user cycles
CMA
for manufacturer cycles.
The Cycles main screen contains a complete overview of all standard
cycles (CST) and, analogously, all user cycles (CUS) and
manufacturer cycles (CMA).
Operating sequence
The following softkeys are available:
New
Creates a new cycle directory
Copy
Copies the selected cycle to the clipboard
Paste
Inserts a cycle which was previously copied to the
clipboard
Delete
Deletes the selected cycle (after a safety prompt)
Rename
Allows the currently selected cycle to be renamed
Enable
The selected file receives/loses the enable identifier.
This is indicated with an "X"; the program can be
worked through
Selection
Cycle Selection working window
Further buttons
Recall
Standard Directories Overview working window
Input
Cycle Selection working window
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
4
03.04
 Siemens AG, 2004. All rights reserved.

Advertisement

This manual also for:

Sinumerik 840diSinumerik 810dHt6

Comments to this Manuals

Symbols: 0
Latest comments: