Date/Time - Siemens SINUMERIK 840D Operator's Manual

Handheld terminal
Hide thumbs Also See for SINUMERIK 840D:
Table of Contents

Advertisement

9
03.04

9.5.2 Date/time

 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Messages, Service Displays, PLC Data – Operating Area Diagnosis
Precondition
• The Date/time softkey in the PLC working window has been
pressed.
The following working window is then displayed:
Date and time working window (inverted softkey: currently active
function)
Operating sequence
• Use the cursor keys to move to the desired input field.
• Input the alphanumerical changes.
• Click on the OK softkey to accept the changes.
Further buttons
Manual sync. Synchronizes the PLC and HMI times.
autom. on
The time after which synchronization is automatically
performed is entered in the "Synchronization time"
field.
autom. off
No automatic synchronization ("Synchronization time"
line disappears).
Recall
Goes to the PLC working window without accepting
the changes.
9
9.5 PLC
9-113

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840diSinumerik 810dHt6

Table of Contents