Siemens SINUMERIK 840D Operator's Manual page 83

7
03.04
References
 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
The following working window is then displayed:
Teach-in – Insert Block working window
Notes
Concurrent teaching-in of Status (STAT) and Turn (TU) only takes
place if "point-to-point" traversing (PTP) is selected and the
associated teach-in parameters have been set. They are only visible if
PTP traversing is supported (machine data set). Otherwise only the
axes are displayed.
The Increment display only appears when incremental traversing is
active.
The STAT and TU displays can be masked via the machine data.
/IAM_IM2 Start-up Guide, Section 11
Operating sequence
• Press G00 if rapid traverse is required,
• Press G01 if feed motion is required,
• Approach the point with the Jog keys,
• Accept the actual position by pressing the Input button, use it to
create a block and then return to the starting window.
Teach-In
7.3 Inserting a block
7
7-83