Download  Print this page

Menus/operating Areas - Siemens SINUMERIK 840D Operator's Manual

Handheld terminal.
Hide thumbs

Advertisement

2
03.04

2.3.8 Menus/operating areas

 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Note
Press the agreement button quickly as far as it goes to ensure it
works properly.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
The HT 6 can be powered up in different ways.
The screen displayed after power-up and the softkey assignment
depend on the machine function selected at the controls (REPOS,
REF) and the operating mode (JOG, AUTO, MDA).
Machine manufacturer
Please refer to the machine manufacturer's specifications.
After pressing the operating area button the operating areas appear in
the softkey display:
Ma-
Para-
chine
meter
The softkeys are then used to change to the main menus for the
corresponding operating areas.
Options Optional functions are marked in the document.
Note
Under certain circumstances it is possible that the softkey assignment
for the main menu might have been changed by the machine
manufacturer.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
2.3 Operating devices
Pro-
Services Diagno
gram
stics
2
User interface
IBN
2-27

Advertisement

   Related Content for Siemens SINUMERIK 840D

This manual also for:

Sinumerik 840diSinumerik 810dHt6

Comments to this Manuals

Symbols: 0
Latest comments: