Siemens SINUMERIK 840D Operator's Manual page 68

5
Manual Mode – Operating Area Machine
5.6 MDA operating mode
Save MDA program
5-68
Softkeys
Actual values Actual value display, depending on the selected
coordinate system
Progr.Ctrl Program control
Delete MDA Deletes the MDA program (without safety prompt)
Save MDA Saves the MDA program.
The following working window appears when this softkey is pressed:
Save MDA Program working window
Operating sequence
• Type in the program name.
• Click on the OK softkey to save the MDA program and return to
the previously active working window.
Further buttons
Recall or
Cancel softkey
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Returns to the previously active working
window
To cancel without accepting the value.
 Siemens AG, 2004. All rights reserved.
5
03.04