Processing The Password - Siemens SINUMERIK 840D Operator's Manual

10
03.04

10.6.4 Processing the password

 Siemens AG, 2004. All rights reserved.
SINUMERIK 840D/840Di/810D Operator's Guide Handheld Terminal 6 (BAH) - 03.04 Edition
Machine Data, NC Start-Up, System Parameters – Operating Area Start-Up
10.6 Setting the system parameters
Function
With this function you can set a new password or delete or change an
existing password.
Precondition
The softkey Set passw. (for example) has been pressed in the
System working window.
The following working window is then displayed:
Set Password working window
Operating sequence
Write the password in the input field,
click on the OK softkey to accept it and return to the System working
window.
A password with an equal or lower user access level can only be set if
none exists, i.e. if it has been deleted or not yet set.
The Operating Area softkey bar is displayed once the user access
level has been successfully changed. The new access rights can then
be checked when a new operating area is selected.
The functions Delete password and Change password should be
handled analogously.
10
10-131