Table of Contents
Advertisement
Figure 29.
The menu bar on the main window shows
each as desired.
At the bottom of the window is the status bar, indicating the status of the connection or
any configuration error messages.
NOTE: For detailed Signal Processing Product Control Program instructions when the
program is open, press
SPPCP Menus
File menu
Click on this to open a drop-down menu displaying six selectable
options: Connect, Disconnect, Save
Configuration..., Restore Configuration...,
File Manager, and Exit.
•
Connect — Select this to reconnect the DVS (or connect a
new device) when it has been disconnected from the Signal
Processing Products Control Program. Follow the steps in
the
Starting the SPPCP
•
Disconnect — Select this to disconnect the unit from the Signal Processing
Products Control Program. The SPPCP remains open, but items on the main window
are inactive (grayed out) and configuration via the SPPCP is not available.
•
Save Configuration... — Select this to save the current DVS configuration to
the PC. A secondary window opens allowing choice of items to save, and selecting a
folder location for the saved xxx.cfg files.
Control Program Main Window
or click on
F1
section on the previous page.
File, Options, Tools,
,
.
Help
Contents
DVS 304 Series • SPPCP
and
. Click on
Help
55
Advertisement
Table of Contents
