Table of Contents
Advertisement
Figure 31.
Systems Settings Window
Only the baud rate can be changed when selecting the RS-232 tab.
Click
or the
in the top right corner of the window to exit without changes.
Cancel
X
•
Reset — If it is necessary, to reset the DVS 304,
select this to open a secondary drop-down box.
Three options are available:
Reset Audio Input
Levels; Reset Picture, Image, Position and Size
Controls; and Reset to Factory Defaults.
Reset Audio Input Levels resets the audio input levels to the default settings.
Reset Picture, Image, Position, and Size Controls resets all
picture controls to their default settings.
Reset to Factory Defaults resets all settings on the device to their factory
defaults, including all video and audio settings, and clears all configuration files from
the device.
Select any reset option as desired.
•
Update Firmware... — Selecting this opens the Firmware Loader application
(where already installed on a connected PC). The Firmware Loader only uploads new
firmware to the device through a TCP/IP connection.
In order for the Update Firmware function to work, the Firmware Loader application
must be installed on the connected PC. If already installed, skip steps 1 through 4.
To download and install the Firmware Loader application:
1.
Go to www.extron.com.
2.
Enter Firmware Loader in the Search field and press Enter.
3.
Locate the Firmware Loader application in the search results and click Download
Now!
4.
Follow the on-screen prompts to complete the download.
DVS 304 Series • SPPCP
58
Advertisement
Table of Contents
