Operation; Front Panel Overview - Extron electronics DVS 304 Series User Manual

Operation

This section of the manual discusses the operation of a DVS 304 device, and is divided
into four sections:
•
•
•
•

Front Panel Overview

Figure 8.
A
B
C
D
E
F
G
Front Panel Overview
Menus, Configuration, and Adjustments
Front Panel Lockout
Setting up the DVS to Work with a Matrix Switcher
1 2 3 4 MENU
B 2
A 1
Typical DVS 304 Device Front Panel Features
Input LEDs — The LED of the selected input lights when pressed. A blinking LED
indicates an audio breakaway input (audio models only).
Composite input button — Input 1 selects composite video input.
•
Composite/YC/component input button — Input 2 selects composite video,
•
YC,or component video input.
S-video input button — Input 3 selects the S-video input.
•
Universal input button — Input 4 selects the RGB scaled (RGBHV, RGBS,
•
RGsB), RGB pass-through, YUVi, YUVp/HDTV, S-video and composite video.
NOTE: RGB pass-through signals (at native rate without additional processing)
are available on analog outputs only. The DVI output is disabled for
pass-through.
Menu button — Use this button to enter and move through the main menu system
for the scaler (see the Menus, Configuration, and Adjustments
Next button — Use this button to step through the submenus in the scaler menu
Menus, Configuration, and Adjustments
system (see the
LCD display — Displays configuration menus and status information (see the
Menus, Configuration, and Adjustments
Infrared sensor — This sensor is used to receive infrared (IR) signals from the IR 902
remote control (see the Extron website
Adjust horizontal ([) knob — In the menu system, rotate this knob to scroll
through menu options and make adjustments.
Adjust vertical ({) knob — In the menu system, rotate this knob to scroll through
menu options and make adjustments.
DIGITAL VIDEO SCALER
ADJUST
NEXT
IR
C 3 D 4 5 6 F
E
section for details).
for details).
DVS 304 Series • Operation
DVS 304
G 7
section for details).
section for details).
9