Table of Contents
Advertisement
•
Input 4 Presets/OSD — The specific settings for size, centering, contrast,
brightness, detail, zoom, and input configuration for input 4 can be saved to a preset.
Up to 128 input presets can be saved. A saved preset can be recalled as desired.
Select a preset number and click
NOTE: Saving to an existing preset overwrites the prior saved data with the new.
In addition, this section enables the OSD text to be set for input 4.
The on-screen display provides a duration setting for the OSD text that appears at
each input 4 switch or input 4 preset recall.
•
Video Mute — Select this to mute or unmute the video image. When selected, the
button text turns red.
•
Audio Mute — Select this to mute or unmute the audio. When selected, the button
text turns red.
•
Freeze — Select this to freeze an image for use as a logo or for annotation.
•
Auto Image — Select this to perform an auto image on an input.
•
Volume % (DVS 304 A only) — This slider allows the user to adjust the volume
percentage for each input.
I/O Configuration Tab
The I/O Configuration tab allows input and output configuration, as well as EDID
emulation settings to be adjusted.
Figure 37.
•
Input Configuration — Set a suitable video type for an input by clicking on the
drop-down box and selecting a listed video type. Check
detection for NTSC and 2:2 film detection for PAL video sources is relevant. Audio
levels for each input can be set via the up and down arrows.
•
Auto Image — Auto Image can be enabled or disabled for all inputs.
Save
The I/O Configuration Tab Window
or
as applicable.
Recall
Film Mode
DVS 304 Series • SPPCP
if 3:2 pull down
62
Advertisement
Table of Contents
